Typical doorstep service scenarios handled for Butterfly gas stoves across residential societies in Ghaziabad (labelled as illustrative repair examples, not verified customer testimonials):
Butterfly Gas Stove Repair in Shalimar Garden (Extension 1) — Illustrative Case
Reported Problem: Customer detected faint gas odor near the back of the stove whenever cooking.
Inspection Findings: 360-degree revolving nozzle O-ring had dried and cracked, leaking minor gas during pipe movement.
Parts Checked: Revolving nozzle assembly, rubber O-ring, Suraksha hose, and valve manifold.
Repair Work: Installed a new 360-degree brass swivel nozzle with fresh O-ring seals and heavy-duty clamps.
Estimated Cost: Parts: ₹250 | Labour: ₹250 | Total: ₹500
Post-Repair Safety Checks: Exhaustive soapy bubble leak test showed zero bubbles while rotating the nozzle through 360 degrees.
Butterfly Gas Stove Repair in Indirapuram (Gyan Khand 1) — Illustrative Case
Reported Problem: Large burner was burning with a smoky yellow flame that blackened tea pans.
Inspection Findings: Venturi mixing tube was clogged with cooking oil grease, starving the burner of secondary air.
Parts Checked: Brass burner crown, venturi tube, air shutter collar, and injector nozzle.
Repair Work: De-greased mixing tube interior, cleaned brass crown slits, and adjusted air shutter collar.
Estimated Cost: Parts: Nil | Labour: ₹350 | Total: ₹350
Post-Repair Safety Checks: Bright, clean blue flame restored on all flame settings without yellow tips.
Butterfly Gas Stove Repair in Vasundhara (Sector 5) — Illustrative Case
Reported Problem: Rotary auto-ignition clicked firmly, but no spark jumped to light the center burner.
Inspection Findings: Ceramic insulator on the spark electrode had cracked, causing high-voltage spark to ground to the chassis.
Parts Checked: Ceramic spark electrode, ignition wire, piezo hammer, and burner spark pin.
Repair Work: Installed a new ceramic spark electrode and set the spark gap to 3.5mm from the burner cap.
Estimated Cost: Parts: ₹200 | Labour: ₹250 | Total: ₹450
Post-Repair Safety Checks: Burner ignited instantly on the very first turn of the knob; leak test confirmed tight joints.
Butterfly Gas Stove Repair in Vijay Nagar (Sector 9) — Illustrative Case
Reported Problem: Both knobs were extremely stiff to turn and the small burner flame was very low.
Inspection Findings: Hardened cooking oil grease had locked the brass spindles; small brass jet was choked with carbon.
Parts Checked: Brass gas cocks, spindle washers, jet orifice, and stainless steel manifold.
Repair Work: Dismantled both gas taps, cleaned spindles in solvent, applied high-temp silicone grease, and reamed the jet.
Estimated Cost: Parts: Nil | Labour: ₹350 | Total: ₹350
Post-Repair Safety Checks: Knobs rotated smoothly with zero friction; both burners delivered strong blue flames.
Butterfly Gas Stove Repair in Nehru Nagar (Sector 2) — Illustrative Case
Reported Problem: Front-right knob was spinning freely on the stem without turning gas on or off.
Inspection Findings: Internal D-shaped metal sleeve inside the plastic knob was cracked and stripped.
Parts Checked: Control knob stem, brass valve spindle, and burner flame output.
Repair Work: Replaced damaged knob with a model-matched heat-resistant ABS knob and tested rotation.
Estimated Cost: Parts: ₹150 | Labour: ₹150 | Total: ₹300
Post-Repair Safety Checks: Smooth on/off control restored; soapy leak test confirmed tight spindle seal.
