Typical doorstep service scenarios handled for Pigeon gas stoves across residential societies in Ghaziabad (labelled as illustrative repair examples, not verified customer testimonials):
Pigeon Gas Stove Repair in Indirapuram (Gyan Khand 2) — Illustrative Case
Reported Problem: Center burner flame was very low and food took twice as long to cook.
Inspection Findings: Boiled-over milk had carbonized inside the small brass jet nozzle and burner cap slits.
Parts Checked: Brass burner crown, jet nozzle orifice, mixing tube, and valve spindle.
Repair Work: De-carbonized burner cap slits in solvent, reamed the brass jet nozzle, and balanced air shutter.
Estimated Cost: Parts: Nil | Labour: ₹300 | Total: ₹300
Post-Repair Safety Checks: Center burner delivered high-heat blue flame; soap bubble test confirmed tight joints.
Pigeon Gas Stove Repair in Shalimar Garden (Main) — Illustrative Case
Reported Problem: Customer smelled gas near the back of the stove whenever moving the cylinder.
Inspection Findings: 360-degree swivel nozzle O-ring was cracked from age, leaking gas under slight movement.
Parts Checked: Swivel nozzle assembly, rubber O-ring, Suraksha hose, and manifold pipe.
Repair Work: Installed a new brass swivel nozzle with fresh O-ring seals and tightened stainless steel clamps.
Estimated Cost: Parts: ₹200 | Labour: ₹200 | Total: ₹400
Post-Repair Safety Checks: Exhaustive soapy bubble leak test showed zero bubbles while rotating the nozzle 360 degrees.
Pigeon Gas Stove Repair in Pratap Vihar (Sector 11) — Illustrative Case
Reported Problem: Both knobs were stuck and required pliers to turn; right burner flame was flickering yellow.
Inspection Findings: Factory grease inside valve spindles had turned rock-hard; venturi tube was packed with grease lint.
Parts Checked: Brass gas cocks, venturi tubes, air shutters, and rubber hose.
Repair Work: Dismantled both gas taps, cleaned spindles in solvent, applied high-temp silicone grease, and cleared tubes.
Estimated Cost: Parts: Nil | Labour: ₹350 | Total: ₹350
Post-Repair Safety Checks: Knobs turned effortlessly by hand; sharp blue flames restored on both burners.
Pigeon Gas Stove Repair in Govindpuram (Sector 4) — Illustrative Case
Reported Problem: Front-right knob was spinning loosely without turning on the gas.
Inspection Findings: Internal D-shaped metal sleeve inside the plastic knob was split and stripped.
Parts Checked: Control knob stem, brass valve spindle, and burner flame output.
Repair Work: Replaced broken knob with a model-matched heat-resistant ABS knob and tested rotation.
Estimated Cost: Parts: ₹120 | Labour: ₹150 | Total: ₹270
Post-Repair Safety Checks: Smooth on/off control restored; soapy leak test confirmed tight spindle seal.
Pigeon Gas Stove Repair in Mohan Nagar — Illustrative Case
Reported Problem: Small tea burner flame died instantly whenever turned to minimum sim setting.
Inspection Findings: Sim bypass screw channel inside the gas cock was choked with dried cooking oil.
Parts Checked: Gas cock bypass screw, mixing tube air shutter, and burner cap.
Repair Work: Cleaned the micro-bypass channel with solvent, lubricated the spindle, and tuned minimum flame.
Estimated Cost: Parts: Nil | Labour: ₹250 | Total: ₹250
Post-Repair Safety Checks: Burner maintained steady gentle simmer flame even in breezy kitchen conditions.
Pigeon Gas Stove Repair in Kavi Nagar (Sector 4) — Illustrative Case
Reported Problem: Customer reported hissing sound from the rear left burner and smoky yellow flame.
Inspection Findings: Burner cap was warped from high heat, creating an irregular gap for gas escape.
Parts Checked: Brass burner cap, burner bowl seat, venturi tube, and gas hose.
Repair Work: Replaced warped burner cap with a compatible forged brass ring and reseated the burner bowl.
Estimated Cost: Parts: ₹250 | Labour: ₹200 | Total: ₹450
Post-Repair Safety Checks: Quiet, uniform blue flame restored; soap bubble leak test confirmed zero gas leakage.